Angle Broom Attachment For Skid Steer Loader For Sale – Made In USA
For A FREE Angle Broom Attachment Quote Call 281-342-0200
Avnix angle broom for skid steer loaders is essentially a rotary broom that attaches to the front of a skid steer loader. Our angle broom is used to eliminate an assortment of debris from roads, sidewalks, highways, driveways, and commercial areas.
Challenges it Resolves
There are many kinds of debris that produce obstacles, eyesores, and safety hazards. When mother nature produces heavy rain, mud forms in puddles and dries on paved surfaces. Grime blows with the wind in dry parts of the country, forming piles of earth that make travel areas uncomfortable and dangerous to walk on.
In a job situation, this slows down work flow and frequently the outcome is hazardous conditions for employees. One of the main and most difficult forms of obstructions is snow. We think of large masses of snow as challenging. Nevertheless the light snow that a major segment of the country experiences on a regular basis can be even more hazardous.
What looks like small amount of snow on the ground is enough to cause sliding, slips, falls, motor vehicle accidents and more than enough to bring commercial production to a standstill.
Removing such obstructions with manual tools is difficult and time consuming. A skid steer loader angle broom with manual angle is far more efficient for removing obstructing debris. It is also less time consuming and much safer to control when used properly per industry standard procedures.
Angle Broom Features at a Glance
This multipurpose skid steer loader attachment is basically a hydraulically driven revolving broom that attaches to the end of a skid steer loader. As the loader moves forward, the broom turns and pushes any obstructing debris, dirt, trash or snow away from the loader.
Our skid steer angle broom is also bi-directional. It can be configured up to 30 degrees to either the left or to the right. This allows debris displacement to be accurately controlled. The sweeper also features a built in stand that allows it to be stored with the bristles off the floor. Storage is easier, and sweepers can be changed more easily with this feature.
A nylon sleeve protect hoses from abrasion. There are no chains or sprockets used in device either. The skid steer sweeper operates on a direct drive motor that lifts and lowers the broom. A universal mounting plate makes it compatible for all full-sized, modern skid steer loaders & telehandlers.
Applications and Benefits
The skid steer angle broom can be used for a large number of commercial and urban applications. Broom attachment is most commonly used in construction site cleanup as a debris removal tool that is used to sweep obstructions away from areas around new building construction. This is very important to maintaining a safe, orderly work flow necessary to finishing projects on time and under budget.
Warehouses also use the skid steer sweepers to keep areas in front of loading docks free from debris that can hinder or damage trucks coming into the dock to load or unload material.
Many commercial businesses that have a lot of snow fall in the winter will use skid steer brooms to clear out parking lots and walkways. Municipalities also use them for clearing off sidewalks and rotundas that snowplows have trouble reaching.
✮ Angle Broom Features
- One piece fast change Broom – No loss time installing multiple bristle wafers.
- Bi-Directional, manually angles up to 30 degrees left or right of center.
- Built-in Stand keeps Bristles off ground when stored and aids in changing Brooms.
- Hoses kept together and protected from abrasion in Nylon Sleeve.
- Flush Faced Hydraulic Quick Couplers included.
- Direct Drive Motor – No chains or sprockets.
- Loader Arms raise and lower broom.
- Universal Skid-Steer Mounting Plate fits all modern full size Skid-Steers.
Angle Broom Skid Steer Attachment Hydraulic Specifications
- Reversible Parker Motor 12 to 28 gpm – 3,000 PSI
- Minimum Hydraulic Requirements 12 gpm @ 2000 PSI
- DO not exceed 28 gallons per minute
- Caution: never store angle broom with weight on bristles. This will cause warping of bristles
- .ALWAYS store on stands keeping broom bristles off the ground
NEVER operate an angle broom on a “high-flow” unless the broom is equipped with a “high-flow” motor. Motor failure can occur if such use is performed. AVNIX Construction Equipment Is NOT RESPONSIBLE for damage incurred to the hydraulic motor due to “high-flow” usage.
For A FREE Angle Broom Attachment Quote Call 281-342-0200
Specifications | Model AV-190M-72 | Model AV-190M-84 |
Angle Broom Size | 26″ dia. x 72″ long | 26″ dia. x 84″ long |
Angle Broom Type | Poly Bristle With Integral Steel Core | |
Optional Broom | 50% Poly & 50% Steel Bristles | |
Overall Length | 87″ | 99″ |
Overall Height | 30″ | 30″ |
Sweeping Width in Angle Position | 63″ | 73″ |
Weight | 750 lbs. | 850 lbs. |
Hydraulic Drive | Reversible Parker Motor | |
Hydraulic Flow Range | 12 to 28 gpm | |
Maximum Hydraulic Pressure | 3000 PSI | |
Minimum Hydraulic Requirements | 12 gpm @ 2000 PSI |